One-Piece Swimsuit with 3D Stereo Print, High-Waist Suspender Skirt and Sleeveless Sling Style

This one-piece swimsuit is built around a sleeveless sling design with a high-waist cut and a suspender-skirt panel, giving coverage across the torso, midsection and upper legs while leaving the arms and shoulders free to move. The fabric blends cotton with polyester (polyester fibre) as the main composition, and the surface carries a 3D stereo print applied through a printing craft. It is a single-piece garment in an ethnic style, with a miniskirt-length skirt and a temperament commute styling direction. Eight colourways are available — G103Z76, G103Z77, G103Z78, G103Z79, G103Z80, G103Z81, G103Z82 and G103Z83 — across six sizes from S to 3XL. Because Asian sizing runs one to two sizes smaller than European and American sizing, the larger size is the safer choice when measurements sit between two sizes, and a 2-3cm difference should be allowed for manual measurement.

Features and Construction

The construction centres on a single-piece combination form rather than separate top and bottom pieces. The sleeveless sling straps hold the swimsuit in place at the shoulders, while the suspender-skirt element adds a skirted layer over the lower section. The 3D stereo pattern is the dominant visual feature, applied by printing rather than weaving.

Material and Build

The fabric composition is cotton plus polyester (polyester fibre), with polyester listed as the main fabric component. Cotton contributes a soft surface feel, while polyester supports the structure of the garment and holds the printed pattern on the fabric. The swimsuit is made as a single piece, with the skirt attached as part of the same garment rather than as a separate item. Printing is the stated craft used to produce the 3D stereo effect across the surface.

Size and Practical Fit

Six sizes are offered: S, M, L, XL, 2XL and 3XL. The high-waist cut sits higher on the torso than a standard waistline, and the suspender-skirt panel extends to miniskirt length. A sizing note applies here: Asian sizes are one to two sizes smaller than European and American equivalents, so buyers between two sizes should take the larger one. A 2-3cm variance is possible because measurements are taken manually, and the size chart should be checked before ordering.

Uses and Placement

The sleeveless sling style and high-waist coverage suit swimming and poolside wear where a one-piece garment is preferred over a two-piece. The skirted lower section and ethnic-style print also fit settings where a more covered swim silhouette is wanted.

Event or Professional Use

With its temperament commute styling direction and ethnic-style print, this swimsuit moves beyond plain athletic swimwear. The suspender-skirt design and 3D stereo pattern give it a dressed appearance that suits holiday resorts, spa visits, pool parties and similar occasions where the swimsuit is part of the outfit rather than purely functional kit. The high-waist cut keeps the midsection covered throughout wear.

Everyday Home Use

For regular swimming, the one-piece form removes the need to match separate top and bottom pieces. The sleeveless straps leave the arms free for stroke movement, and the cotton-polyester blend keeps the garment easy to handle between uses. The miniskirt-length skirt panel provides additional coverage around the hips and upper legs compared with a standard one-piece swimsuit.

Benefits and Buying Value

The main practical gain is a single garment that combines coverage, a printed pattern and a skirted lower section. Eight colourways and six sizes widen the choice available from one product listing.

Reuse and Low Maintenance

The cotton and polyester blend is straightforward to look after: rinse in cool water after swimming and dry away from direct heat to help preserve both the fabric and the printed 3D stereo pattern. Because the swimsuit is a single piece, there are no separate parts to keep track of, which simplifies storage and packing between swim sessions.

Why Choose This Product

Choose this swimsuit if you want a one-piece with sleeves omitted, a high waist and a suspender skirt rather than a close-cut racing shape. The 3D stereo print and ethnic-style direction set it apart from plain block-colour swimwear, while the eight colourways allow a choice of print. Size selection is the key decision: check the chart, allow 2-3cm for manual measurement, and size up if between sizes, since Asian sizing runs one to two sizes smaller than European and American sizing.